APMM Community Forum : Solvents & Adhesives
Welcome Guest   
 
 Subject : Re:Double sided tape question.. 07/18/2019 12:01:04 PM 
PATRICK MCCAULEY
Posts: 12
Location
Thank you both for the recommendation.
I will try them both.

P
 Subject : Re:Double sided tape question.. 07/17/2019 10:30:15 AM 
TOM DELWICHE
Posts: 1
Location
I have been using Spectape for many years and highly recommend them. I get the ST-501 (paper) and the ST-595 (clear-ish polyester)
https://spectape-tx.com/double-sided-tapes/
Good luck,
Tom Delwiche / President
Modeled Horizons / 7864 Elm Street NE / Fridley, MN 55432
763.574.2088 Office / 763.443.8235 Mobile
www.modeledhorizons.com
 Subject : Re:Double sided tape question.. 07/17/2019 10:20:44 AM 
MICHAEL SCRIBNER
Posts: 187
Location: Overland Park, KS
We get our clear double-stick from this website.

https://www.findtape.com/JVCC-DC-4109RS-Double-Coated-Film-Tape/p268/?idx=2&tid=2&info=jvcc

The one we use is JVCC, but you can plug in various parameters and maybe find something more to your liking. For our purposes, the one I linked is a nice clear tape that's very thin and pretty tenacious in terms of bond strength.
 Subject : Double sided tape question.. 07/17/2019 09:49:09 AM 
PATRICK MCCAULEY
Posts: 12
Location
I used to use a Nichiban double-sided tape for sticking together models/parts.
It was temporarily permanent and worked fantastically.
Naturally, it is not longer available.

Does anyone have a recommendation for a fairly thin film, high tack double stick tape? Not a foam tape, I would use this for relatively smooth surfaces. CLear would be ideal, but white would be ok too.

Thanks Y'All,

Patrick
 
# of Topics per Page