APMM Community Forum : Systems, Equipment, & Software
Welcome Guest   
 
 Subject : Re:Re:Re:SLA Printing Services (Not 3D Systems's Quickparts).. 09/05/2019 11:54:25 AM 
Ernest Ang
Posts: 30
Location
Thank you so much everyone for the overwhelming response. We actually just got a SLA print job that we are quoting for and I have approached all the mentioned vendors for estimation, so the timing is perfect.

Hopefully we will get the job and maybe try out some of the vendors in the future.

Thanks again to my fellow APMM members, you guys are awesome!
 Subject : Re:Re:SLA Printing Services (Not 3D Systems's Quickparts).. 09/04/2019 06:07:41 PM 
George Petry
Posts: 2
Location
We work with Midwest Prototyping, they are a great folks, easy to work with, and get things right on the first try.
 Subject : Re:SLA Printing Services (Not 3D Systems's Quickparts).. 09/04/2019 11:06:00 AM 
MARK FORTENBACHER
Posts: 2
Location
Give Midwest Prototyping a call, they are in Wisconsin, they are great to work with, very timely, great quality and I believe they are APMM members!
https://www.midwestproto.com/
 Subject : Re:SLA Printing Services (Not 3D Systems's Quickparts).. 09/04/2019 10:42:35 AM 
Nathan
Posts: 1
Location
Tom Schulte <[email protected]> at CIDEAs has always been responsive and done great work for me.
 Subject : Re:Re:SLA Printing Services (Not 3D Systems's Quickparts).. 09/04/2019 10:33:11 AM 
Nick Dothage
Posts: 2
Location
We've had really great experiences with Stratasys Direct.
 Subject : Re:SLA Printing Services (Not 3D Systems's Quickparts).. 09/04/2019 10:20:47 AM 
PATRICK MCCAULEY
Posts: 12
Location
Not in Detroit, but you may want to try https://interpromodels.com/
They should be able to service you with satisfaction.
 Subject : SLA Printing Services (Not 3D Systems's Quickparts).. 09/04/2019 10:00:36 AM 
Ernest Ang
Posts: 30
Location
Hi fellow APMM members,

My company in Detroit has been outsourcing our SLA printing to 3D Systems's Quickparts in the past few years whenever we have any needs for larger SLA parts since we do not have any large format SLA printers in house. However, we have so many issues dealing with them, for example, whenever there is an issue with the parts (which is clearly their fault), they always try to put the blame on us and never take up the responsibilities to fix the problem.

Maybe because they are such a big firm and they do such an enormous amount of printings, they don't care much about the small amount of printing that we do.

Can anyone recommend any SLA printing services company (preferably closer to Detroit) that is more customer-service minded and that they are willing to work with their customer to meet their needs?

Thank you all in advance!
 
# of Topics per Page